2001–2005 Lexus IS 300 Wheel & Tire Fitment Guide
XE10 generation, base. 5x114.3 bolt pattern, stock 17×7 ET50 on 215/45R17. Compare 3 popular upgrades or try your own size.
Specs
| Bolt pattern | 5x114.3 |
|---|---|
| Center bore | 60.1 mm |
| Lug thread | M12x1.5 |
| Reference trim | base |
| Stock wheel | 17×7 ET50 |
| Stock tire | 215/45R17 |
| Stock overall diameter | 24.62 in |
Calculator
Starts on the stock setup. Drag the sliders or load one of the popular upgrades below.
The small mark on each slider shows the current value. Type in the box for sizes outside the slider range.
Custom vehicle measurementsOptional
Measure with your current wheels on the car and the results below show how much room the new setup leaves. The drawings use your numbers too. Leave blank anything you haven't measured.
- Park on level ground at normal ride height, wheels straight.
- Front and rear differ. Measure the axle you're changing, or enter the tighter corner.
Millimetres or centimetres are recommended: small gaps are easier to read accurately than inch marks.
Narrowest gap between the inside of the tire (or wheel, whichever sits further in) and the strut, spring perch or upper control arm. Wheels pointed straight.
Hang a plumb line or hold a straightedge vertically from the fender lip above the hub, then measure across to the outermost point of the tire or wheel. Enter a negative number if it already sticks out.
Straight up from the top of the tire to the fender lip, with the car on the ground at normal ride height.
Smallest gap between the outer edge of the brake caliper and the inside of the wheel barrel.
- Poke
- 0mm
- Wheel face stays where it is.
- Inner clearance
- 0mm
- Same room to the suspension.
- Overall diameter
- 0%
- 0 in, within ±3%.
- Speedo reads 60
- 60mph
- Your actual speed.
| Vehicle | Lexus IS 300 base | ||
|---|---|---|---|
| Bolt pattern | 5x114.3 | Hub bore | 60.1 mm |
| Current | 17×7 ET50, 215/45R17 | New | 17×7 ET50, 215/45R17 |
Popular upgrades
Each size compared with the stock 17×7 ET50, 215/45R17.
| Setup | Poke | Inner clearance | Diameter | Speedo reads 60 | Action |
|---|---|---|---|---|---|
| Mild 18×818×8 ET45, 225/40R18 | +17.7 mm | −7.7 mm | +1.9% | 61.1 mph | |
| Flush 18×9.5 rolled18×9.5 ET30, 215/40R18 | +51.8 mm | −11.8 mm | +0.6% | 60.4 mph | |
| Aggressive 19×8.519×8.5 ET35, 225/35R19 | +34 mm | −4.1 mm | +2.4% | 61.4 mph |
Shop this setup
I may earn a commission from links on this page.
Searches use the new setup above. Check the bolt pattern, offset and center bore on each listing before you buy, and use hub-centric rings if the wheel's bore is larger than your hub.
Notes
- The standard sedan wheel is 17×7 ET50 on 215/45R17. The SportCross and some 2002+ cars run a staggered rear of 17×7.5 ET55 with 225/45R17. A 16×6.5 ET50 wheel with 205/55R16 was also offered from 2002.
- On 18×8 +45, 235/40R18 fronts hit the fender when turning, so owners drop to 225/40R18.
- An 18×8.5 +30 front with 225/40R18 generally needs fender rolling or liner work, especially when lowered.
- The front fender limit is tight. 19×10 +45 rears need the fender rolled flat and pulled.
Questions
What bolt pattern does a 2001–2005 Lexus IS 300 use?
The 2001–2005 Lexus IS 300 uses a 5x114.3 bolt pattern with a 60.1 mm center bore and M12x1.5 lug threads.
What size wheels and tires are stock on the 2001–2005 Lexus IS 300 base?
The 2001–2005 Lexus IS 300 base came with 17×7 ET50 wheels and 215/45R17 tires, about 24.6 inches in overall diameter.
How far does a 18×9.5 ET30 wheel stick out on a 2001–2005 Lexus IS 300?
On the 2001–2005 Lexus IS 300, compared with the stock 17×7 ET50, a 18×9.5 ET30 sits 51.8 mm further out at the outer lip and 11.8 mm closer to the suspension at the inner barrel.
Which 2001–2005 Lexus IS 300 wheel and tire upgrade keeps the speedometer most accurate?
Of the 2001–2005 Lexus IS 300 upgrades listed here, 18×9.5 ET30 · 215/40R18 is closest to the stock 215/45R17, changing overall diameter by +0.6%. At an indicated 60 mph you would actually be doing 60.4 mph.
Do aftermarket wheels need hub-centric rings on a 2001–2005 Lexus IS 300?
The 2001–2005 Lexus IS 300's hub bore is 60.1 mm. Wheels machined to exactly 60.1 mm center on the hub directly; wheels with a larger bore need 60.1 mm hub-centric rings to avoid vibration.
Also on 5x114.3
These share the bolt pattern. Check offset, hub bore and brake clearance before swapping wheels.
| Vehicle | Generation | Bolt pattern | Hub bore |
|---|---|---|---|
| 2015–2025 Lexus RC F | USC10 | 5x114.3 | 60.1 mm |
| 2023+ Toyota GR Corolla | E210 | 5x114.3 | 60.1 mm |
| 1993–1998 Toyota Supra | A80 (MK4) | 5x114.3 | 60.1 mm |
| 2002–2006 Acura RSX | DC5 | 5x114.3 | 64.1 mm |
| 2009–2014 Acura TSX | CU2 | 5x114.3 | 64.1 mm |
| 2019+ Genesis G70 | 1st gen (IK) | 5x114.3 | 67.1 mm |